Monthly Archives: July 2018

What to Look for When Buying Dangerous Goods Storage Cabinets?

Published Post author

There are many dangerous goods storage cabinets that are now available in the market. This sometimes make it difficult to determine which type of cabinet is best for your needs. There are various things that need to be considered before purchasing one. Below are some of them to help in your decision-making process.



First of all, it is very important to choose a cabinet that complies with standards when it comes to storing and handling of combustible and flammable liquids. The majority of suppliers would state if the cabinet is compliant or otherwise. If they don’t, you can give them a call and ask.

This factor is very important as it will not only prevent potential injuries, but will also eliminate any financial liability as a result of non-compliance.


Self-Closing Door

When you have made sure that the cabinet is compliant, then it should have self-closing doors. It is important that the doors are close-fitting, self-closing, and held shut and latch shut automatically.


Non-Metal Cabinets

If you want to buy a non-metal cabinet, you need to ensure that it is 100% non-metal in construction. There are times when cabinets with metal components corrode through time, thus defeating the purpose of having a polyethylene cabinet in the first place. Make sure that you will be choosing one that is 100% non-metal and includes locks, hinges, screws, etc.



Although this is not often required in dangerous good chemical storage cabinets, it is sometimes required as a form of risk control measure, especially when the cabinet is situated in enclosed areas where there are corrosive and toxic substances.

It is often the responsibility of the user to install the ventilation ducting, but to do this, the cabinet needs to have pre-fitted venting bungs. There are some suppliers who will be charging extra for this, but others include this as a standard.


Visual Component

In contrast to the popular belief, there is really no standard colors that the cabinet needs to adhere to. In most cases, you will see yellow if its flammable and blue for corrosive, etc. But you are not actually required to designate specific colors for the type of dangerous goods. This offers the flexibility to select a cabinet that is visually appealing and can blend in the workplace.


Delivery Charges

In most cases, these types of cabinets are expensive to ship. In order to save money on unexpected charges, it’s best that you ask the supplier to include the delivery charges when obtaining a quote. This will help you get the full cost upfront when comparing suppliers.

By considering all these things, you can make decisions easily. Selecting the right cabinet for your dangerous goods will ensure that you can use it for a long time and will help you save money in the long run.

July 31, 2018

Considerations When Buying Drill Rigs for Sale in Australia

Published Post author

The mineral exploration drilling business is a money-making one. This is why in today’s time more and more drill rigs are for sale. This is very evident in so many countries like in Australia that has realized how much money the equipment can bring in. This equipment is very critical in completing contracts, winning bids, and of course, make money. But some companies that are not completely convinced that it can make money, there’s always a question if it’s worth to invest in it.

To help you in making the right decision, below are some things you can consider when buying a drill rig.


Considerations when Buying a Drill Rig

1.      Availability

Along with the market that is constantly improving, it is expected that lead times will be longer whether you are buying a new one or just rebuilding. When there is a decline in the market, the inventory tends to be higher and plants are not so busy building new drill rigs. This leads to a reduced lead time. On the other hand, when the market improves and contracts increase, the inventory is lower and plants get busy building rigs. This increased the lead time.


2.      New Technology

If you used to have an old drill rig, purchasing drill rigs for sale in Australia will give you the chance to drill productively. Newer ones are always more productive and offer reliable uptime. They also come with more safety features. With more safety requirements, new rigs can meet such while older ones may not.


3.      Reliability

A used drill rig is prone to breakdowns compared to new ones. Downtown is a big factor that affects drilling contracts. Cost can quickly pile up as a result of loss of productivity, repairing the rig, and rig uptime contractual obligations. A drill rig with good operating condition can help in productivity. Aside from this, it can also keep the contractor from being kicked off the site.


4.      New Versus Used Drill Rigs

When there is a need for a rig, there’s a dilemma whether to purchase a new or used one. But the thing is, it’s difficult to find a gently used equipment and it’s not easy to be certain of how gentle or harsh it has been used. For example, hydraulic systems can be delicate and when mistreated or experiencing contamination, it can cost a lot to replace motors, pumps, or valves. This can be a big risk to buy a drill rig if its history and maintenance are not known.

5.      Price

When buying a new drill rig, you may be tempted to choose based on price, especially that there are so many low-cost options available in the market. But just like when buying other things, you need to check the total cost of the ownership. In this case, lower priced rigs may have higher ownership cost. When choosing take your time until you find one that will bring you returns not losses.

It can be a challenge to find an investment-worthy drill rig in the market today. But taking your time to make sure that you get the right one will yield great benefits and quality work.


July 19, 2018

Garage Fire Rated Wall: Another Way to Save Lives

Published Post author

Installing a fire rated wall (insulated concrete formwork or icf) for your garage can bring so much benefits, more than you can imagine. In most cases, we think that garage is not as important as the other parts of the house. But since, it’s attached to the property it can be a point of access for any intruders or can be a source of accidents as well, thus it is highly important to secure it. Sometimes, we make use of the garage as a place to perform a lot of unsafe tasks or it is where we would often store our flammable liquid and other dangerous chemicals. With all these risks, it definitely be a wise decision to invest in making sure that your garage is safe and secure.

Ways to Make your Garage Safe

Garage Entry Door to the House

It should be a solid door that can be made of wood or metal with proper weather stripping to create an air-tight barrier between the living quarters and your garage. It would be better if it is 20-minute fire-resistant. Another factor to look into is a self-closing door. This one is basically an upgrade of your usual door but is a great investment as well. You basically have to replace some of your regular door hinges with a spring type and a well-adjusted door that will close automatically.


Entry Door from the Garage to the House is Slightly Elevated or Higher than the Garage Floor Surface

The majority of building codes would require a step between the garage floor and house door. Although 4” is recommended, you can still check your local code. This step can help prevent spilled gasoline vapors from entering your house, thus partially protecting the residents from carbon monoxide fume.


Separation Wall

This one is only applicable to house-attached garages. The idea behind a ICF fire rated wall is to give homeowners an extra hour of protection from the fire that may start inside the garage. To achieve this, the walls should be sheathed with at least 5/8” drywall on every side. But you still have to check with your local code enforcement division as some jurisdictions may require for the thickness to be doubled. If the wall is made of cinder block, brick, solid concrete, stone, or other types of non-flammable materials, then you just have to worry about penetrations.

Now, you may have realized that your garage plays an important part in keeping your home and family safe. Thus, it is not something that you can just take for granted. The ones mentioned above are just a few steps to make sure that your walls can resist fire and prevent any accident from getting worse. Be sure to apply them and abide by the rules and regulations in your area for better safety.

July 18, 2018

Endless Possibilities with Waterjet Machine

Published Post author

Waterjet machine is one of the fastest growing machine tools in the world- thanks to its ease of operation and versatility. Today, manufacturers are realizing that there is no limit when it comes to the capabilities of this cutting machine.


Machines shops, big or small, are also starting to realize the great productivity and efficiency by implementing waterjets in their different operations. This tool is becoming to be the first choice of many shops and industries. The technology behind the machine has been available for quite a long time now. Through time, it has greatly evolved with research and development.


But what really makes it popular? A waterjet actually needs some secondary operations, heat distortion, produce net-shaped without heat-affected zones, or mechanical stresses that can be caused by other types of cutting methods, can cut using a narrow kerf, and offer better usage or raw materials that can be tightly nested. But the machines itself is very easy to use and operators can be easily trained in just a few hours and start producing high-quality parts.

Additionally, it can virtually cut any type of material while leaving a satin-like smooth edge. All the benefits it can offer equate to significant savings, especially in industries that have defined productivity by cost per hour. Some of the other benefits of waterjet cutting are highlighted below.


Waterjet Cut Benefits



A waterjet machines makes it possible to cut a wide array of applications with so much ease. Regardless of the shape, material, dimension, the machine can bring valuable versatility to a business.


Expanded Capabilities

Whatever the nature of the business is- whether it’s aerospace, automotive, fabricator, tool and die, stone and tile, or even job shop can be saved by the machine. With it, cutting stone, metal, composites, plastics, rubber, ceramic, and so many others are possible. The cut can even be up to 8 inches thick without any heat-affected zone and excellent edge quality.


Production and Material Cost Reduction

Waterjet cutter only need minimal tooling and fixturing. With this, you can save some valuable time on your shop floor. As they can cut clean and accurate edges that allows tight nesting while reducing scrap, you can save a great deal of money through better material utilization.


Complements Existing Technology

At present, it’s common to see many job shops that add water jets to their operations in order to complement other types of cutting technologies like laser, plasma, milling, and EDM. While every shop has a different requirement for its cutting projects, the majority of them find waterjets to be extremely helpful in their operations that help enhance their profitability and productivity.

With a very demanding kind of world we are living in today, it’s such a relief to have this kind of technology that can make jobs easier, efficient, and produces great quality results.


July 18, 2018

Have A Business? Then You Need A Digital Marketing Agency

Published Post author

To have your own business is not easy. But knowing how to operate it so it becomes successful is the real challenge. You need to have the best knowledge you can have when it comes to developing your products. At the same time, you need to make sure that you are equipped with the right abilities to offer services. But to be an efficient manager or business owner does not really require you to be an expert in marketing. Even if you really want to work on your own advertising, there are just some things that may not be so easy to accomplish.

But the company should not be put at risk due to lack of marketing expertise. This is why a digital marketing agency exists to save a company. Listed are some of the benefits of hiring one.

Productive Time Utilization

Marketing is both an art and science. This means that if you do not have the passion or talent for it, you cannot expect that your product will be the best in the industry. What you can do it to outsource the needs of the company by hiring the most efficient people to do the job. Doing so will give you the benefit of time utilization so you can keep doing the things you do best.


Competitive Edge

Using marketing in a business is already considered to be a great competitive edge. For instance, there are was a huge boost in sales of automobile models that have been featured in “Transformers” movie. This is because they were displayed in the movie scenes which attracted the attention of the viewers. This is only one example of doing marketing to boost sales.

You can also do the same for your business and you can anticipate the same affirmative results. Marketing is not just really about promoting a product or service or boosting its publicity. But it also concerns branding or defining the things that your company represents and explains why your customer base needs to have what you are offering. These are definitely the things that a digital marketing agency can do for you and your business.


Modern Solution

In this age of technology, it’s a must for your marketing efforts to work hand in hand with the innovations around. But if you are someone who is not really technology, then the best thing you can do is to hire experts to do it for you. It’s a given that these professionals are well-adept with the new technology so they can use it for the benefit of your business.

For sure, the above reasons are enough to convince you that it’s best to hire an agency for your marketing needs. So, be sure to hire the best one and put your trust on the hands of the best people.


July 16, 2018