Category Archives: Building/Real Estate

Achieve a Great Patio with Concrete Formwork

Published Post author


A concrete formwork, by definition is the system of supports and boards that provide support to the concrete until it cures since concrete is considered to be an aggregate like sand and coarse gravel, cement that serves as the binder, and water. Given such, concrete is a heavy material with the water mass and aggregate. The form needs to be a material that could withstand the pressure. In most cases, a contractor will be using a one-inch thick plywood. Also, the forms should be reinforced every 16 inches or 2 feet that comes with a brace that is anchored into the ground.


Achieving a Clean Edge

The mass of the concrete will be pushed out and will flow everywhere, but in order to have a clean edge, the walls of the formwork needs to be extremely strong in order to withstand the pressure. Thus, the vertical bracing needs to be driven deep into the ground. Any sign of softness in the earth would translate into sagging stakes.

Once these stakes sag, the form will bulge. This will then result to concrete that cures crooked. A stake that badly formed is difficult to correct with wet concrete. The mass of the concrete is heavy and concrete hardening is another factor to consider. Concrete can cure within minutes and you can forget about adjusting the formwork for any deviations. If the form bulges and the concrete cures, it’s possible to make use of a diamond blade concrete chop saw to trim the concrete. However, this can be a dirty process and even time consuming.


The Details

You also need to bear in mind that since curing is a chemical process, the concrete may bind to the forms. This, you can use formoil on form surfaces. The oil will stop the concrete from binding to the form. At the same time, the concrete expands as soon as it dries so you will need an expansion joint between the house and the patio.

The expansion needs to be inserted which absorbs the movement of the slabs. Lastly, for your concrete detailing, you will be needing some scoring tools and concrete float finishing. In order to achieve a smooth surface, the finishing tool will be drawn across the top surface to smooth out the finish and the expansion joint scoring tool that creates the needed cracks.

Moreover, with a little preparation, you can have that beautiful patio that you and your loved ones can enjoy and this will be the result of your good and solid concrete formwork. In case you still feel intimidated, there will be experts in the field of concrete consulting who can provide help with the project. An attractive driveway or concrete patio can last for so many years to come.

October 26, 2018

Non Slip Tiles: Why Your Home Needs Them

Published Post author

The home is the place where we spend the majority of our time. This is why it is understandable that you invest to make it more visually practical and beautiful. When it comes to flooring needs, it can be very tricky to strike the needed balance. But this is always possible to make it happen with the help of non slip tiles that are also becoming very popular in this present time due to the numerous advantages they have to offer.

With these types of tiles, you can achieve the desired look for your home while making sure that your flooring is safe, beautiful, and practical as possible. Here are the reasons why,


Easy to Clean

Among the biggest benefits of non slip tiles is that they are very easy to clean. This means that you can maintain their attractive look for a long time. In order to keep the flooring in its best condition, you just have to fill up a bucket with warm water. Then add some pH neutral floor cleaner. Using a damp cloth, you can start working on various sections of the floor. This will help guarantee that you will not end up flooding the bathroom or kitchen by using a floor mop to empty the amounts of water to the floor.



The bathroom and kitchen are some of the busiest rooms in the home and this is where moisture is often seen. This means that these spaces have higher risk of slipping over. Whether it is an overspill from doing the dishes, build up condensation, or food spillages from cooking, the kitchen can be a minefield, especially of you are boiling the water or dealing with some hot appliances.

By being able to install a non-slip kitchen flooring, you would be able to minimize the risk of accidents in such a busy area in the house. The same goes for non-slip bathroom flooring. However, these are not the only areas that can benefit from this extra underfoot safety. It is also worth to consider the porches and hallways where you can bring more moisture from the outside.

Practical Choice

Non-slip floor tiles that are intended to be used in the kitchens, bathrooms, and other wet rooms can help keep kids and even pets safe. This is very beneficial for all households.

If you are looking to update the interior design of your home but you don’t want to sacrifice safety, then, the use of these types of tiles for your flooring will help you achieve all these. Such tiles also come in a very wide variety of colors and styles so you can always choose one that will best fit your preferences and have the best solution for your home needs.


October 26, 2018

Garage Fire Rated Wall: Another Way to Save Lives

Published Post author

Installing a fire rated wall (insulated concrete formwork or icf) for your garage can bring so much benefits, more than you can imagine. In most cases, we think that garage is not as important as the other parts of the house. But since, it’s attached to the property it can be a point of access for any intruders or can be a source of accidents as well, thus it is highly important to secure it. Sometimes, we make use of the garage as a place to perform a lot of unsafe tasks or it is where we would often store our flammable liquid and other dangerous chemicals. With all these risks, it definitely be a wise decision to invest in making sure that your garage is safe and secure.

Ways to Make your Garage Safe

Garage Entry Door to the House

It should be a solid door that can be made of wood or metal with proper weather stripping to create an air-tight barrier between the living quarters and your garage. It would be better if it is 20-minute fire-resistant. Another factor to look into is a self-closing door. This one is basically an upgrade of your usual door but is a great investment as well. You basically have to replace some of your regular door hinges with a spring type and a well-adjusted door that will close automatically.


Entry Door from the Garage to the House is Slightly Elevated or Higher than the Garage Floor Surface

The majority of building codes would require a step between the garage floor and house door. Although 4” is recommended, you can still check your local code. This step can help prevent spilled gasoline vapors from entering your house, thus partially protecting the residents from carbon monoxide fume.


Separation Wall

This one is only applicable to house-attached garages. The idea behind a ICF fire rated wall is to give homeowners an extra hour of protection from the fire that may start inside the garage. To achieve this, the walls should be sheathed with at least 5/8” drywall on every side. But you still have to check with your local code enforcement division as some jurisdictions may require for the thickness to be doubled. If the wall is made of cinder block, brick, solid concrete, stone, or other types of non-flammable materials, then you just have to worry about penetrations.

Now, you may have realized that your garage plays an important part in keeping your home and family safe. Thus, it is not something that you can just take for granted. The ones mentioned above are just a few steps to make sure that your walls can resist fire and prevent any accident from getting worse. Be sure to apply them and abide by the rules and regulations in your area for better safety.

July 18, 2018